Click to enlargeVictron Cable f/Smart BMS CL 12-100 to MultiPlus
Manufacturer: Victron EnergyPart #: ASS070200100SKU: 92591
Add $83.00 more to qualify for free shipping.
Item #: 92591
Category: Charger/Inverter Combos
● In stock — ships fast from US warehouses
- Ships from US warehouses
- Free shipping on orders over $99
- Secure checkout — your info is protected
- Genuine marine-brand parts, not knockoffs
- 30-day returns
- Marine parts support — we know boats
Description
Cable for Smart BMS CL 12-100 to MultiPlus This cable will allow the MultiPlus 500VA – 1600VA, MultiPlus Compact 800VA – 2kVA and MultiPlus-II models to be used with BMS products that have no VE. Bus interface, such as the Smart BMS CL 12-100 and the small BMS.
These MultiPlus models can be controlled from the Load/Charge Disconnect outputs and Load/Charger outputs respectively. The cable must be wired to the remote on/off connector of the MultiPlus models: When used with the MultiPlus 500VA-1200VA models connect the black wire to the ON terminal and the red wire to the (+) terminal.
When used with the MultiPlus Compact 800VA-2kVA models connect the black wire to the middle terminal and the red wire to the right (IN) terminal. When used with the MultiPlus-II models connect the black wire to the lower (-) terminal and the red wire to the upper (+) remote on-off terminal.
Both the Load/Charge Disconnect outputs of Smart BMS CL 12-100 and Load/Charger outputs of the small BMS must be in ‘High’ state in order for the MultiPlus to operate. After shutdown due to low battery voltage, run the alternator or use a battery charger on the primary side of the BMS to reset the system.
The MultiPlus will then switch on and start charging (if connected to an AC power source). Please contact your dealer for any returns, repairs or support issues related to this product.
Specifications
| Brand | Victron Energy |
|---|---|
| Part Number | ASS070200100 |
| EverTide SKU | 92591 |
| UPC | 8719076051183 |
Specifications are provided by the manufacturer. Confirm fitment for your application before ordering, or contact us and we'll help.
Compare similar products
Complete your setup
Returns & warranty
Returns are accepted within 30 dayson items that are unused and in their original packaging. Some items may be subject to a manufacturer restocking fee. Special-order items may not be eligible — if you're unsure, ask us before ordering.
Victron Energy productscarry the manufacturer's standard warranty. For a warranty claim or a return authorization, see our full returns policy or contact us.
Electrical — frequently asked
- What’s the difference between marine wire and regular wire?
- Marine wire uses tinned (tin-coated) copper strands that resist the corrosion salt air causes, and it’s more finely stranded so it flexes with vibration without breaking. Standard automotive or household wire corrodes and fails much faster in a marine environment.
- How do I size a fuse for a marine circuit?
- Size the fuse to protect the wire, not just the device. Match the fuse rating to the wire gauge’s safe current capacity so the fuse blows before the wire overheats. When adding a new circuit, follow the wire manufacturer’s ampacity chart for the gauge and run length you’re using.
- Do I need a battery switch on my boat?
- A marine battery switch is strongly recommended. It lets you disconnect the battery for storage or service, isolate a failed battery, and — on multi-battery setups — choose which bank powers the boat. It’s a core safety and reliability component.
Customer reviews
No reviews yet — this product.
Fast shipping
Ships from US warehouses — free over $99
The right part
Marine-grade parts matched to your boat
Real support
Questions? We know boats — call or email