Click to enlargeSmart Tabs II Series Trim Tabs by Lectrotab 16" X 10" f/23'-30' Boats - 6500lbs Max
Manufacturer: LectrotabPart #: ST1610-120SKU: 110534
- 10 ft
- 6500 lb
- Aluminum
Item #: 110534
Category: Trim Tabs
● In stock — ships fast from US warehouses
- Ships from US warehouses
- Free shipping on orders over $99
- Secure checkout — your info is protected
- Genuine marine-brand parts, not knockoffs
- 30-day returns
- Marine parts support — we know boats
Description
Smart Tabs II Series Trim Tabs 16" X 10" for 23'-30' Boats - 6500lbs Max If these trim tabs don't provide you with an outstanding performance increase, contact us within 30 days of your purchase. Why buy a manually adjusting trim tab set when you can get the automatic trim tabs that will self-adjust and perform better for less money?
Designed for boats 23' - 30' weighing up to 6500 lbs. The ST 1610 Series is ideal for low-profile fiberglass, Aluminum, and RIB design boats with transom widths less than 10 feet (trailerable boats).
This heavy-duty system provides an active suspension system for the boat that increases stability and smooths the ride even in rough seas. Easier planning at slower speeds, increased payload performance, improved tracking and handling are available automatically without the need for pilot interface.
No switches, no electric or hydraulic connections, and no maintenance. Just get in and go!
Specially designed for boats between 23' and 30', under 10' in width, and up to 8,500 Lbs gross weight. The ST1610 series features two nitrogen gas actuators per plate, providing increased stern lift and twice the reactive dampening, eliminating any instant changes from water pressure variances.
This fully automatic and active system provides a smooth and undetectable reaction to boat speed and water conditions, creating a more comfortable ride. Our breakthrough technology in trim tabs is completely automatic, requiring no operator adjustment while underway.
Nauticus trim tabs self-adjust according to how you load and maneuver your boat. The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration.
The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation. Reduce the minimum planning speed by up to 33% Faster Acceleration Increase top speed Provide a level, more comfortable ride at lower speeds Improve fuel economy, handling, a
Specifications
| Brand | Lectrotab |
|---|---|
| Part Number | ST1610-120 |
| EverTide SKU | 110534 |
| UPC | 698690161066 |
| Material | Aluminum |
| Cable Length | 10 ft |
Specifications are provided by the manufacturer. Confirm fitment for your application before ordering, or contact us and we'll help.
Compare similar products
Complete your setup
Lectrotab SX ProTroller Series Trim Tabs 9.5 X 10 f/14-17' Boats w/40-80 HP
$239.00
Lectrotab SX ProTroller Series Trim Tabs 9.5 X 10 f/17-20' Boats w/80-175 HP
$239.00
Lectrotab XKA Aluminum Alloy Trim Tab - 12x12
$644.30
Lectrotab XKA Aluminum Alloy Trim Tab - 12x24
$812.60Returns & warranty
Returns are accepted within 30 dayson items that are unused and in their original packaging. Some items may be subject to a manufacturer restocking fee. Special-order items may not be eligible — if you're unsure, ask us before ordering.
Lectrotab productscarry the manufacturer's standard warranty. For a warranty claim or a return authorization, see our full returns policy or contact us.
Boat Outfitting — frequently asked
- What material should marine hardware be made of?
- For most exposed hardware, 316 stainless steel is the marine standard — it resists salt corrosion far better than 304 stainless or plated steel. Marine-grade aluminum, UV-stabilized nylon, and King StarBoard are also common for non-structural fittings.
- How do I know a replacement seat or hatch will fit?
- Measure the mounting pattern (bolt spacing), the cutout or base dimensions, and any post diameter or height on the part you’re replacing. Match those to the new part’s specs — outfitting parts follow common sizes but are not universal, so confirming dimensions avoids returns.
- Do I need backing plates for deck hardware?
- For anything that takes load — grab rails, cleats, ladder steps, seat pedestals — yes. A backing plate spreads the load across a larger area of the deck or transom so fasteners don’t pull through under stress.
Customer reviews
No reviews yet — this product.
Fast shipping
Ships from US warehouses — free over $99
The right part
Marine-grade parts matched to your boat
Real support
Questions? We know boats — call or email