What size anchor do I need for my boat?

Anchor sizing is based on boat length, weight, and windage, and every anchor maker publishes a sizing chart. When in doubt, size up — a slightly oversized anchor holds better in poor bottoms and heavy weather, and the extra weight is minor next to the risk of dragging.

How much anchor rode (scope) should I let out?

A common rule is 7:1 — seven feet of rode for every foot of water depth (measured from the bow roller) in settled conditions, and more when it’s rough. Adequate scope sets the anchor at a low angle so it digs in rather than pulling out.

How do I choose the right dock fenders?

Match fender size to your boat’s length and weight (makers provide charts), and use enough of them to spread contact along the hull. Cylindrical fenders suit most hulls; round ball fenders suit high-freeboard boats and corners. Add chafe gear where lines run over edges.

Click to enlarge

Maxwell

Maxwell ANCHORMAX™ Windlass

Manufacturer: MaxwellPart #: ANCHORMAXSKU: 14941

600W
80A
12V
16 ft
850 lb
Stainless Steel

$1537.39● In stock

Item #: 14941

Category: Windlasses

● In stock — ships fast from US warehouses

Ships from US warehouses
Free shipping on orders over $99
Secure checkout — your info is protected
Genuine marine-brand parts, not knockoffs
30-day returns
Marine parts support — we know boats

Description

ANCHORMAX™ Windlass Features: Has an extremely high power to weight ratio ompact, fully sealed gearbox is driven by a vertically mounted, permanent magnet motor Intrusion below decks is minimised making the design ideal for boats from 5m (16ft) to 10m (32ft) Fitting to the boat is simplicity itself as no dismantling of the winch is required Gear housings are marine-grade alloy and the drum is stainless steel Supplied as a single direction (clockwise) unit, complete with deck switch, fastenings, template and fitting instructions Not recommended for use to haul halyards Not recommended for use to haul chain Note: Each winch is supplied as a single direction (clockwise) fully tested unit complete with fitting instructions, deck switch, templates and fastenings. STANDARD EQUIPMENT Footswitch SPECIFICATIONS Maximum Line Pull 386kg (850lb) Speed @ nominal working load 24m/min (76ft per min) (80 amps with 100kg/220lb load) Voltage 12v Power 600w Weight 8kg(17.

6lb) Maximum Boat Load 10m (33ft) Max. Boat Weight 4 Tons This product may not be returned to the original point of purchase.

Please contact the manufacturer directly with any issues or concerns.

Specifications

Brand	Maxwell
Part Number	ANCHORMAX
EverTide SKU	14941
UPC	1000000001853
Power	600 W
Voltage	12 V
Material	Stainless Steel
Cable Length	16 ft

Specifications are provided by the manufacturer. Confirm fitment for your application before ordering, or contact us and we'll help.

Compare similar products

	Maxwell ANCHORMAX™ Windlass$1537.39You're viewing	Maxwell HRC 10-8 Rope Chain Horizontal Windlass 5/16" Chain, 5/8" Rope 12V, with Capstan$4265.85	Maxwell HRC10 Horizontal Rope Chain Windlass - 12V 3/8" Chain, 5/8" Rope$4692.62	Maxwell HRC6 12V Horizontal Freefall Rope/Chain Series 1/4" Chain 1/2" Rope$1936.84
Power	600 W	—	—	600 W
Voltage	12 V	12 V	12 V	12 V
Material	Stainless Steel	Aluminum	Stainless Steel	Nylon

Complete your setup

Maxwell

Maxwell HRC 10-8 Rope Chain Horizontal Windlass 5/16" Chain, 5/8" Rope 12V, with Capstan

$4265.85

Maxwell

Maxwell HRC10 Horizontal Rope Chain Windlass - 12V 3/8" Chain, 5/8" Rope

$4692.62

Maxwell

Maxwell HRC6 12V Horizontal Freefall Rope/Chain Series 1/4" Chain 1/2" Rope

$1936.84

Maxwell

Maxwell HRC8 12V Horizontal Freefall Rope/Chain Series 5/16" Chain 9/16" Min Rope

$1549.48

Returns & warranty

Returns are accepted within 30 dayson items that are unused and in their original packaging. Some items may be subject to a manufacturer restocking fee. Special-order items may not be eligible — if you're unsure, ask us before ordering.

Maxwell productscarry the manufacturer's standard warranty. For a warranty claim or a return authorization, see our full returns policy or contact us.

Anchoring & Docking — frequently asked

What size anchor do I need for my boat?: Anchor sizing is based on boat length, weight, and windage, and every anchor maker publishes a sizing chart. When in doubt, size up — a slightly oversized anchor holds better in poor bottoms and heavy weather, and the extra weight is minor next to the risk of dragging.
How much anchor rode (scope) should I let out?: A common rule is 7:1 — seven feet of rode for every foot of water depth (measured from the bow roller) in settled conditions, and more when it’s rough. Adequate scope sets the anchor at a low angle so it digs in rather than pulling out.
How do I choose the right dock fenders?: Match fender size to your boat’s length and weight (makers provide charts), and use enough of them to spread contact along the hull. Cylindrical fenders suit most hulls; round ball fenders suit high-freeboard boats and corners. Add chafe gear where lines run over edges.

Customer reviews

No reviews yet — this product.

Fast shipping

Ships from US warehouses — free over $99

The right part

Marine-grade parts matched to your boat

Real support

Questions? We know boats — call or email