What material should marine hardware be made of?

For most exposed hardware, 316 stainless steel is the marine standard — it resists salt corrosion far better than 304 stainless or plated steel. Marine-grade aluminum, UV-stabilized nylon, and King StarBoard are also common for non-structural fittings.

How do I know a replacement seat or hatch will fit?

Measure the mounting pattern (bolt spacing), the cutout or base dimensions, and any post diameter or height on the part you’re replacing. Match those to the new part’s specs — outfitting parts follow common sizes but are not universal, so confirming dimensions avoids returns.

Do I need backing plates for deck hardware?

For anything that takes load — grab rails, cleats, ladder steps, seat pedestals — yes. A backing plate spreads the load across a larger area of the deck or transom so fasteners don’t pull through under stress.

Lenco 9" x 9" Edge Mount Trim Tab Kit without Switch Kit 12V

Click to enlarge

Lenco Marine

Lenco 9" x 9" Edge Mount Trim Tab Kit without Switch Kit 12V

Manufacturer: Lenco MarinePart #: 15013-101SKU: 29284

12V
Stainless Steel

$954.34● In stock

Item #: 29284

Category: Trim Tabs

● In stock — ships fast from US warehouses

Ships from US warehouses
Free shipping on orders over $99
Secure checkout — your info is protected
Genuine marine-brand parts, not knockoffs
30-day returns
Marine parts support — we know boats

Description

9" x 9" Edge Mount Trim Tab Kit without Switch Kit -12V Lenco Electric Edge Mount Trim Tab Kits make your boat ride smoother, dryer, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ball screw design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics.

Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Edge Mount actuators mount at the trailing edge of the plane, requiring 4" (10.

16 cm) less transom height than Lenco standard mount trim tabs. Kit Contents: 2 each of 12-gauge stainless steel trim tab blades 2 each of #15054-001 actuator with 6' leads & Deutsch plugs 2 each of #30133-103 20' actuator extension wiring harnesses 2 each of #15085-001 (116) upper mounting brackets with gland seal 2 each of #50014-001 (119) lower mounting brackets 1 each of the Lenco owner’s / installation manual All necessary stainless steel mounting hardware Specifications: Suggested Boat Length: 14' to 18' Length of Tab: 9" Width of Tab: 9" Hinge Height: 2" Minimum Transom Height: 13.

5" Blades: 12 Gauge Stainless Steel Finish: Smooth Switch Kit: Sold Separately Class: Fuel Efficient Compliance: CE Certified Compatibility: Any Boat Actuators: 12-volt This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

California Prop 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Specifications

Brand	Lenco Marine
Part Number	15013-101
EverTide SKU	29284
UPC	874847004343
Voltage	12 V
Material	Stainless Steel

Specifications are provided by the manufacturer. Confirm fitment for your application before ordering, or contact us and we'll help.

Compare similar products

	Lenco 9" x 9" Edge Mount Trim Tab Kit without Switch Kit 12V$954.34You're viewing	Lenco 12" x 12" Edge Mount Trim Tab Kit w/o Switch Kit 12V$1029.35	Lenco 12" x 12" Edgemount Trim Tab Kit w/LED Indicator Switch Kit 12V$1583.36	Lenco 12" x 12" Edgemount Trim Tab Kit w/Standard Tactile Switch Kit 12V$1360.35
Voltage	12 V	12 V	12 V	12 V
Material	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel

Complete your setup

Lenco Marine

Lenco 12" x 12" Standard Performance Trim Tab Kit w/LED Indicator Switch Kit 12V

$1639.16

Returns & warranty

Returns are accepted within 30 dayson items that are unused and in their original packaging. Some items may be subject to a manufacturer restocking fee. Special-order items may not be eligible — if you're unsure, ask us before ordering.

Lenco Marine productscarry the manufacturer's standard warranty. For a warranty claim or a return authorization, see our full returns policy or contact us.

Boat Outfitting — frequently asked

What material should marine hardware be made of?: For most exposed hardware, 316 stainless steel is the marine standard — it resists salt corrosion far better than 304 stainless or plated steel. Marine-grade aluminum, UV-stabilized nylon, and King StarBoard are also common for non-structural fittings.
How do I know a replacement seat or hatch will fit?: Measure the mounting pattern (bolt spacing), the cutout or base dimensions, and any post diameter or height on the part you’re replacing. Match those to the new part’s specs — outfitting parts follow common sizes but are not universal, so confirming dimensions avoids returns.
Do I need backing plates for deck hardware?: For anything that takes load — grab rails, cleats, ladder steps, seat pedestals — yes. A backing plate spreads the load across a larger area of the deck or transom so fasteners don’t pull through under stress.

Customer reviews

No reviews yet — this product.

Fast shipping

Ships from US warehouses — free over $99

The right part

Marine-grade parts matched to your boat

Real support

Questions? We know boats — call or email