What material should marine hardware be made of?

For most exposed hardware, 316 stainless steel is the marine standard — it resists salt corrosion far better than 304 stainless or plated steel. Marine-grade aluminum, UV-stabilized nylon, and King StarBoard are also common for non-structural fittings.

How do I know a replacement seat or hatch will fit?

Measure the mounting pattern (bolt spacing), the cutout or base dimensions, and any post diameter or height on the part you’re replacing. Match those to the new part’s specs — outfitting parts follow common sizes but are not universal, so confirming dimensions avoids returns.

Do I need backing plates for deck hardware?

For anything that takes load — grab rails, cleats, ladder steps, seat pedestals — yes. A backing plate spreads the load across a larger area of the deck or transom so fasteners don’t pull through under stress.

Lenco 12" x 9" Standard Performance Trim Tab Kit w/LED Indicator Switch Kit 12V

Click to enlarge

Lenco Marine

Lenco 12" x 9" Standard Performance Trim Tab Kit w/LED Indicator Switch Kit 12V

Manufacturer: Lenco MarinePart #: RT12X9ISKU: 29243

12V
Stainless Steel

$1582.78● In stock

Item #: 29243

Category: Trim Tabs

● In stock — ships fast from US warehouses

Ships from US warehouses
Free shipping on orders over $99
Secure checkout — your info is protected
Genuine marine-brand parts, not knockoffs
30-day returns
Marine parts support — we know boats

Description

Standard Performance Series Tabs Standard actuator with 5/16" stainless steel through bolts. 1" turned up edges with 2" taper on the inside.

All 12-gauge 304 stainless steel construction with Electro-Polished Blades We make the best boats better! ™ Running wide open in rough seas isn't for the faint of heart.

Aggressive boating requires durable boat accessories. Lenco's Standard Performance series of trim tabs are built to handle whatever you or Mother Nature might throw at them.

Everything about your boat is designed to go hard and fast. Why should your trim tab system be any different?

All stainless steel construction (no dissimilar metals), Electro Polished Blades for long lasting good looks Actuator speed is precise and controllable so there are no surprises at top speeds Actuators Instant response Fully submersible, maintenance-free and sealed for life High-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case Tactile Switch w/ Indicator LED for all Single Actuator Trim Tab Systems Features: Self-contained, sealed keypad Self-contained, sealed control box module Fade/smudge-proof, laser engraved graphics Plug & play switch wiring harness connector Includes 36" power pigtail for control box 2" hole cut-out size, overall size 2. 75" x 2.

75" Built-in retract feature returns tabs to a fully retracted position when power is removed 2 high-intensity L. E.

D. indicator displays show the exact position of our trim tabs at all times Photo eye reads ambient light and adjusts the L.

E. D.

indicator display intensity for optimum viewing in direct sunlight 12 & 24-volt compatibility Includes Self-Check Feature Each kit contains: Tactile LED Indicator Switch Kit 2 actuators with 6' Lead & Deutsch Plugs 2 12 Gauge SS Electro Polished trim tab planes 2 20' Actuator Extension Wiring Harness 2 Upper Mounting Bracket with Gland Seal 2 Lower Mounting Bracket All Necessary stainless steel mounting Hardware WARNING: This product can expose you to chemicals including di(2-ethylh

Specifications

Brand	Lenco Marine
Part Number	RT12X9I
EverTide SKU	29243
Voltage	12 V
Material	Stainless Steel

Specifications are provided by the manufacturer. Confirm fitment for your application before ordering, or contact us and we'll help.

Compare similar products

	Lenco 12" x 9" Standard Performance Trim Tab Kit w/LED Indicator Switch Kit 12V$1582.78You're viewing	Lenco 12" x 12" Edge Mount Trim Tab Kit w/o Switch Kit 12V$1029.35	Lenco 12" x 12" Edgemount Trim Tab Kit w/LED Indicator Switch Kit 12V$1583.36	Lenco 12" x 12" Edgemount Trim Tab Kit w/Standard Tactile Switch Kit 12V$1360.35
Voltage	12 V	12 V	12 V	12 V
Material	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel

Complete your setup

Lenco Marine

Lenco 12" x 12" Standard Performance Trim Tab Kit w/LED Indicator Switch Kit 12V

$1639.16

Returns & warranty

Returns are accepted within 30 dayson items that are unused and in their original packaging. Some items may be subject to a manufacturer restocking fee. Special-order items may not be eligible — if you're unsure, ask us before ordering.

Lenco Marine productscarry the manufacturer's standard warranty. For a warranty claim or a return authorization, see our full returns policy or contact us.

Boat Outfitting — frequently asked

What material should marine hardware be made of?: For most exposed hardware, 316 stainless steel is the marine standard — it resists salt corrosion far better than 304 stainless or plated steel. Marine-grade aluminum, UV-stabilized nylon, and King StarBoard are also common for non-structural fittings.
How do I know a replacement seat or hatch will fit?: Measure the mounting pattern (bolt spacing), the cutout or base dimensions, and any post diameter or height on the part you’re replacing. Match those to the new part’s specs — outfitting parts follow common sizes but are not universal, so confirming dimensions avoids returns.
Do I need backing plates for deck hardware?: For anything that takes load — grab rails, cleats, ladder steps, seat pedestals — yes. A backing plate spreads the load across a larger area of the deck or transom so fasteners don’t pull through under stress.

Customer reviews

No reviews yet — this product.

Fast shipping

Ships from US warehouses — free over $99

The right part

Marine-grade parts matched to your boat

Real support

Questions? We know boats — call or email