Click to enlargeLectrotab XKA Stainless Steel Trim Tab Kit w/One-Touch Control - 12 x 18
Manufacturer: LectrotabPart #: XKASL12X18SKU: 96276
- 12V
- 1000 lb
- Stainless Steel
Item #: 96276
Category: Trim Tabs
● In stock — ships fast from US warehouses
- Ships from US warehouses
- Free shipping on orders over $99
- Secure checkout — your info is protected
- Genuine marine-brand parts, not knockoffs
- 30-day returns
- Marine parts support — we know boats
Description
XKA Stainless Steel Trim Tab Kit with One-Touch Control - 12 x 18 The Lectrotab stainless steel trim tab design provides unmatched strength and reliability. All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.
This design eliminates the need for welding. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.
The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation. The actuator assembly is packaged in a non-metallic permanently sealed housing.
No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.
The actuator incorporates either a standard or low profile transom mounting bracket. Lectrotab's one-touch leveling LED control buts the complete control of your trim tabs at your fingertips.
Features: Continuous rolled and pinned hinge provides added strength and eliminates the need for welding Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications: Trim Tab Size (L x W) - 12" x 18" (30 x 46 cm) Boat Length - 20' to 40' (6 to 12 M) Trim Tab Material - 12 gauge, 304 Stainless Steel Actuator DC Voltage - 12 V Actuator Stroke Length - 2. 25" (57 mm) Actuator Cable Length - 23' (7 M) Actuator Vertical Height - 11.
875" (302 mm) Rocker Switch Dimensions (W x H) - 3" x 3" (77 x 77 mm) Rocker Switch Mounting Hole Cutout (H x W) - 2. 25" x 2.
5" (57 to 64 mm) Rocker Switch Operating Voltage - 12 or 24 V In the Box: One (1) One-Touch Control Two (2) Stainless St
Specifications
| Brand | Lectrotab |
|---|---|
| Part Number | XKASL12X18 |
| EverTide SKU | 96276 |
| Voltage | 12 V |
| Material | Stainless Steel |
Specifications are provided by the manufacturer. Confirm fitment for your application before ordering, or contact us and we'll help.
Compare similar products
Complete your setup
Lectrotab SX ProTroller Series Trim Tabs 9.5 X 10 f/14-17' Boats w/40-80 HP
$239.00
Lectrotab SX ProTroller Series Trim Tabs 9.5 X 10 f/17-20' Boats w/80-175 HP
$239.00
Lectrotab XKA Aluminum Alloy Trim Tab - 12x12
$644.30
Lectrotab XKA Aluminum Alloy Trim Tab - 12x24
$812.60Returns & warranty
Returns are accepted within 30 dayson items that are unused and in their original packaging. Some items may be subject to a manufacturer restocking fee. Special-order items may not be eligible — if you're unsure, ask us before ordering.
Lectrotab productscarry the manufacturer's standard warranty. For a warranty claim or a return authorization, see our full returns policy or contact us.
Boat Outfitting — frequently asked
- What material should marine hardware be made of?
- For most exposed hardware, 316 stainless steel is the marine standard — it resists salt corrosion far better than 304 stainless or plated steel. Marine-grade aluminum, UV-stabilized nylon, and King StarBoard are also common for non-structural fittings.
- How do I know a replacement seat or hatch will fit?
- Measure the mounting pattern (bolt spacing), the cutout or base dimensions, and any post diameter or height on the part you’re replacing. Match those to the new part’s specs — outfitting parts follow common sizes but are not universal, so confirming dimensions avoids returns.
- Do I need backing plates for deck hardware?
- For anything that takes load — grab rails, cleats, ladder steps, seat pedestals — yes. A backing plate spreads the load across a larger area of the deck or transom so fasteners don’t pull through under stress.
Customer reviews
No reviews yet — this product.
Fast shipping
Ships from US warehouses — free over $99
The right part
Marine-grade parts matched to your boat
Real support
Questions? We know boats — call or email