Click to enlargeLectrotab XKA Aluminum Alloy Trim Tab Kit w/ALC-1 Control - 12 x 9
Manufacturer: LectrotabPart #: XKASAL12X9ASKU: 96343
- 1000 lb
- Aluminum
Item #: 96343
Category: Trim Tabs
● In stock — ships fast from US warehouses
- Ships from US warehouses
- Free shipping on orders over $99
- Secure checkout — your info is protected
- Genuine marine-brand parts, not knockoffs
- 30-day returns
- Marine parts support — we know boats
Description
XKA Aluminum Alloy Trim Tab Kit with ALC-1 Control - 12 x 9 The Lectrotab Aluminum Alloy trim tabs are uniquely designed to meet the needs of Aluminum hulled boats and are an economical option for all boats. All Aluminum Alloy tabs are fabricated with an extremely strong "no-break" polypropylene hinge.
All Aluminum tabs are sealed with a corrosion resistant epoxy coating. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.
The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation. The actuator assembly is packaged in a non-metallic permanently sealed housing.
No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.
The actuator incorporates either a standard or low profile transom mounting bracket. The Automatic Leveling Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride.
Additionally, the ALC automatically corrects the roll from side to side and pitch from fore to aft to enhance your boating experience and improve your fuel economy. Features: All Tabs sealed with a corrosive resistant epoxy coating Equivalent strength to 10 gauge stainless steel "No Break" polypropylene hinge tested over 300,000 cycles to a 90° bend without failure Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications: Trim Tab Size (L x W) - 12" x 9" (30 x 23 cm) Boat Length - 18' to 29' (5.
5 to 8. 5 M) Trim Tab Material - Marine grad
Specifications
| Brand | Lectrotab |
|---|---|
| Part Number | XKASAL12X9A |
| EverTide SKU | 96343 |
| Material | Aluminum |
Specifications are provided by the manufacturer. Confirm fitment for your application before ordering, or contact us and we'll help.
Compare similar products
Complete your setup
Lectrotab SX ProTroller Series Trim Tabs 9.5 X 10 f/14-17' Boats w/40-80 HP
$239.00
Lectrotab SX ProTroller Series Trim Tabs 9.5 X 10 f/17-20' Boats w/80-175 HP
$239.00
Lectrotab XKA Aluminum Alloy Trim Tab - 12x12
$644.30
Lectrotab XKA Aluminum Alloy Trim Tab - 12x24
$812.60Returns & warranty
Returns are accepted within 30 dayson items that are unused and in their original packaging. Some items may be subject to a manufacturer restocking fee. Special-order items may not be eligible — if you're unsure, ask us before ordering.
Lectrotab productscarry the manufacturer's standard warranty. For a warranty claim or a return authorization, see our full returns policy or contact us.
Boat Outfitting — frequently asked
- What material should marine hardware be made of?
- For most exposed hardware, 316 stainless steel is the marine standard — it resists salt corrosion far better than 304 stainless or plated steel. Marine-grade aluminum, UV-stabilized nylon, and King StarBoard are also common for non-structural fittings.
- How do I know a replacement seat or hatch will fit?
- Measure the mounting pattern (bolt spacing), the cutout or base dimensions, and any post diameter or height on the part you’re replacing. Match those to the new part’s specs — outfitting parts follow common sizes but are not universal, so confirming dimensions avoids returns.
- Do I need backing plates for deck hardware?
- For anything that takes load — grab rails, cleats, ladder steps, seat pedestals — yes. A backing plate spreads the load across a larger area of the deck or transom so fasteners don’t pull through under stress.
Customer reviews
No reviews yet — this product.
Fast shipping
Ships from US warehouses — free over $99
The right part
Marine-grade parts matched to your boat
Real support
Questions? We know boats — call or email