Click to enlargeDavis Rocker Stopper Boat Stabilizer
Manufacturer: Davis InstrumentsPart #: 352SKU: 76105
- 26 ft
- 10 lb
- Nylon
Add $79.01 more to qualify for free shipping.
Item #: 76105
Category: Accessories
● In stock — ships fast from US warehouses
- Ships from US warehouses
- Free shipping on orders over $99
- Secure checkout — your info is protected
- Genuine marine-brand parts, not knockoffs
- 30-day returns
- Marine parts support — we know boats
Description
Rocker Stopper Boat Stabilizer Rocker Stoppers help dampen the rocking motion of boats at anchor. Simply tie Rocker Stoppers approximately 44 cm (18″) apart, making a string of them, with a 5-10 pound weight attached at the bottom of the string.
Hang one string off each side of the boat. Just four units per side are what it takes on most boats to 36′.
Be sure you hang them where they will always be underwater. Many people use mushroom anchors with their Rocker Stoppers because this type of weight nests well inside the last Rocker Stopper in your string.
Use 10 mm (3/8″) braided nylon or 3-stranded nylon line. Use without a weight (or with a reduced weight) for drift fishing.
Rocker Stoppers will slow down drift substantially. They are also great to use at the end of a dock to stabilize the tip from rocking.
Rocker Stoppers nest together and each one is 33 cm (14″) in diameter. It’s lightweight and molded of high impact, virtually indestructible styrene.
Can be deployed or retrieved in seconds. Unaffected by saltwater and cannot affect the sides of your boat.
Units are made to “nest” within each other, so storage is a breeze. A Number of Rocker Stopper Units Needed on Each Side of the Boat (Sail or Power): Up to 26 feet (0-8 m) – 3 27 to 36 feet (8-11 m) – 4 37 to 42 feet (11-13 m) – 5 43 to 50 feet (13-15 m) – 8
Specifications
| Brand | Davis Instruments |
|---|---|
| Part Number | 352 |
| EverTide SKU | 76105 |
| UPC | 011698035205 |
| Material | Nylon |
| Cable Length | 26 ft |
Specifications are provided by the manufacturer. Confirm fitment for your application before ordering, or contact us and we'll help.
Compare similar products
Complete your setup
Returns & warranty
Returns are accepted within 30 dayson items that are unused and in their original packaging. Some items may be subject to a manufacturer restocking fee. Special-order items may not be eligible — if you're unsure, ask us before ordering.
Davis Instruments productscarry the manufacturer's standard warranty. For a warranty claim or a return authorization, see our full returns policy or contact us.
Boat Outfitting — frequently asked
- What material should marine hardware be made of?
- For most exposed hardware, 316 stainless steel is the marine standard — it resists salt corrosion far better than 304 stainless or plated steel. Marine-grade aluminum, UV-stabilized nylon, and King StarBoard are also common for non-structural fittings.
- How do I know a replacement seat or hatch will fit?
- Measure the mounting pattern (bolt spacing), the cutout or base dimensions, and any post diameter or height on the part you’re replacing. Match those to the new part’s specs — outfitting parts follow common sizes but are not universal, so confirming dimensions avoids returns.
- Do I need backing plates for deck hardware?
- For anything that takes load — grab rails, cleats, ladder steps, seat pedestals — yes. A backing plate spreads the load across a larger area of the deck or transom so fasteners don’t pull through under stress.
Customer reviews
No reviews yet — this product.
Fast shipping
Ships from US warehouses — free over $99
The right part
Marine-grade parts matched to your boat
Real support
Questions? We know boats — call or email