Click to enlargeCMC BA-130 Break Away Mount
Manufacturer: CMC Marine ProductsPart #: 13003SKU: 108217
- 28 lb
- 45°
Item #: 108217
Category: Jack Plates
● In stock — ships fast from US warehouses
- Ships from US warehouses
- Free shipping on orders over $99
- Secure checkout — your info is protected
- Genuine marine-brand parts, not knockoffs
- 30-day returns
- Marine parts support — we know boats
Description
BA-130 Break Away Mount The CMC BA-130 Breakaway Unit is designed for boaters navigating shallow, debris-heavy waters, allowing for safe passage over obstacles. It minimizes damage to both the boat and motor while providing up to 45 degrees of movement.
The BA-130 is rated for outboard motors up to a maximum of 130 H. P.
The unit is mounted between the boat transom and the outboard motor. It is designed to help minimize damage to the outboard motor and boat transom only when an obstruction is encountered while running at speeds under 5 M.
P. H.
in the forward direction. As it encounters an obstruction, momentum causes the motor to deflect and rotate up to 45 degrees to slide over the obstruction.
A drawbar spring is incorporated in the unit to help return the motor to its normal position. The drawbar spring also holds the motor at the normal position while operating in the reverse direction at low R.
P. M.
The BA-130 is not designed to encounter obstructions while the boat is being operated in the reverse direction. The unit is pre-drilled with the standard B.
I. A.
hole pattern. For motors that have clamps with thumb screws, CMC part #13022 Transom Clamp Adapter is required.
Product weight is 28 pounds (shipping weight is 33 pounds) and carries a limited 1-year warranty against defects in workmanship. Features: Rated for outboard motors up to 130 H.
P. for enhanced versatility.
Enables safe navigation at speeds under 5 M. P.
H. in the forward direction.
Features spring return technology to ensure the motor returns to its original position after encountering obstructions. Glide safely over submerged logs or debris at low speeds Offers 45 degrees of movement Spring returns the motor to the standard running position Standard B.
I. A.
hole pattern Specifications: Maximum Horse Power: 130 Recommended Speed: Less Than 5 mph Direction: Forward Only Weight: 28 lbs WARNING: The BA-130 is rated for outboard motors up to a maximum of 130 H. P.
Do not encounter obstructions at speeds over
Specifications
| Brand | CMC Marine Products |
|---|---|
| Part Number | 13003 |
| EverTide SKU | 108217 |
| Beam Angle | 45° |
Specifications are provided by the manufacturer. Confirm fitment for your application before ordering, or contact us and we'll help.
Compare similar products
Complete your setup
CMC PL-45 High-Speed Hydraulic Jack Plate 5-1/2" w/out Gauge
$1750.99
CMC Static Jack Plate 5" Vertical Extension
$286.99
CMC PT-35 Tilt & Trim f/Up to 35hp
$899.99
IMPULSE 12" Set Back Electric Jack Plate w/Smart Control - White Cerakote
$2957.99Returns & warranty
Returns are accepted within 30 dayson items that are unused and in their original packaging. Some items may be subject to a manufacturer restocking fee. Special-order items may not be eligible — if you're unsure, ask us before ordering.
CMC Marine Products productscarry the manufacturer's standard warranty. For a warranty claim or a return authorization, see our full returns policy or contact us.
Boat Outfitting — frequently asked
- What material should marine hardware be made of?
- For most exposed hardware, 316 stainless steel is the marine standard — it resists salt corrosion far better than 304 stainless or plated steel. Marine-grade aluminum, UV-stabilized nylon, and King StarBoard are also common for non-structural fittings.
- How do I know a replacement seat or hatch will fit?
- Measure the mounting pattern (bolt spacing), the cutout or base dimensions, and any post diameter or height on the part you’re replacing. Match those to the new part’s specs — outfitting parts follow common sizes but are not universal, so confirming dimensions avoids returns.
- Do I need backing plates for deck hardware?
- For anything that takes load — grab rails, cleats, ladder steps, seat pedestals — yes. A backing plate spreads the load across a larger area of the deck or transom so fasteners don’t pull through under stress.
Customer reviews
No reviews yet — this product.
Fast shipping
Ships from US warehouses — free over $99
The right part
Marine-grade parts matched to your boat
Real support
Questions? We know boats — call or email