Click to enlargeBEP Pro Installer 400A Dual Bank Control Switch - MC10
Manufacturer: BEP MarinePart #: 772-DBCSKU: 58595
- 400A
- Stainless Steel
Item #: 58595
Category: Battery Management
● In stock — ships fast from US warehouses
- Ships from US warehouses
- Free shipping on orders over $99
- Secure checkout — your info is protected
- Genuine marine-brand parts, not knockoffs
- 30-day returns
- Marine parts support — we know boats
Description
Pro Installer 400A Dual Bank Control Switch - MC10 Another addition to our multi award winning Pro Installer EZ Mount range, the innovative Dual Bank Control switch is like 3 switches in one, House, Start, and Emergency Parallel. Offering easy intuitive control for the boater, the Dual Bank Control switch features a unique isolated-On position which allows use of house loads and VHF radio if the engine needs to be electrically isolated, or allows the engine to be isolated during servicing while still providing power to house loads (for lighting, stereo, fridge etc).
For boats or vehicles with single Engine and House battery bank, Dual Bank Control allows the use of optimized battery banks for their respective loads; an appropriately sized deep cycle bank for House loads, and thin plate starting batteries for the Engine. Further, sensitive electronics are isolated from starter motor induced voltage spikes because House and Engine loads are separated during normal operation, unlike Selector battery switches.
As easy as 1, 2, 3, these revolutionary EZ Mount battery switches allow you to wire from the front for the easiest surface mounting. With their shared interconnection height, EZ-Mount battery switches "cluster" directly with the Pro Installer Busbar Range, resulting in the fastest, most compact installations.
Optimized cable access makes installation a breeze. Tested to UL1107 ignition protection, CE Tinned copper 10mm (3/8 inch) studs Stainless steel washers and nuts Fiber reinforced plastics 400A Continuous / 600A 5 minutes Intermittent / 1500A 10 seconds Cranking (cable size to achieve ratings 120mm}, 4/0, smaller cable size will reduce the Amp rating) Waterproof to IP67 Same interconnection height as Pro Installer Removable knob allows isolation during servicing 3 removable side plates for protection Industry standard 3.
85 x 3. 85 inch footprint For surface mounting only Each Pro Installer battery switch is fully tested for pressure sealing, rotation force and
Specifications
| Brand | BEP Marine |
|---|---|
| Part Number | 772-DBC |
| EverTide SKU | 58595 |
| UPC | 843687007807 |
| Material | Stainless Steel |
Specifications are provided by the manufacturer. Confirm fitment for your application before ordering, or contact us and we'll help.
Compare similar products
Complete your setup
BEP 275A Cont Motorized Dual Operation VSS (Voltage Sensitive Switch) - Deutsch Connector
$341.96
BEP Battery Distribution Cluster f/Triple Outboard Engine w/Four Battery Banks
$831.02
BEP Battery Distribution Cluster f/Twin Outboard Engines w/Three Battery Banks
$570.36
BEP Battery Distribution Cluster f/Twin Outboard Engines w/Three Battery Banks w/Motorized VSR
$879.71Returns & warranty
Returns are accepted within 30 dayson items that are unused and in their original packaging. Some items may be subject to a manufacturer restocking fee. Special-order items may not be eligible — if you're unsure, ask us before ordering.
BEP Marine productscarry the manufacturer's standard warranty. For a warranty claim or a return authorization, see our full returns policy or contact us.
Electrical — frequently asked
- What’s the difference between marine wire and regular wire?
- Marine wire uses tinned (tin-coated) copper strands that resist the corrosion salt air causes, and it’s more finely stranded so it flexes with vibration without breaking. Standard automotive or household wire corrodes and fails much faster in a marine environment.
- How do I size a fuse for a marine circuit?
- Size the fuse to protect the wire, not just the device. Match the fuse rating to the wire gauge’s safe current capacity so the fuse blows before the wire overheats. When adding a new circuit, follow the wire manufacturer’s ampacity chart for the gauge and run length you’re using.
- Do I need a battery switch on my boat?
- A marine battery switch is strongly recommended. It lets you disconnect the battery for storage or service, isolate a failed battery, and — on multi-battery setups — choose which bank powers the boat. It’s a core safety and reliability component.
Customer reviews
No reviews yet — this product.
Fast shipping
Ships from US warehouses — free over $99
The right part
Marine-grade parts matched to your boat
Real support
Questions? We know boats — call or email