Click to enlargeANDERSEN 40ST Compact Below Deck Electric FS Winch Variable Speed - 12V
Manufacturer: ANDERSENPart #: RA2040014100SKU: 76496
- 12V
Item #: 76496
Category: Winches
● In stock — ships fast from US warehouses
- Ships from US warehouses
- Free shipping on orders over $99
- Secure checkout — your info is protected
- Genuine marine-brand parts, not knockoffs
- 30-day returns
- Marine parts support — we know boats
Description
40ST Compact Below Deck Electric Full Stainless Winch Variable Speed - 12V Andersen Compact Motor™ electric winches allow you to hoist and trim sails at the push of a button regardless of physical strength, so any crew member can easily and safely trim sails and control lines. Ease of installation The Andersen Compact Motor™ electric winch is available in two formats for either Above Deck or Below Deck motor placement.
Motor gearbox and controller are integrated into one compact unit with no extra control box necessary. Simplified electrical installation requires just the connection of positive and negative power cables to the motor terminals and the connection of the push button using the included output cable.
Efficient, variable speed The Andersen Compact Motor™ is a brushless DC motor carefully matched to a low profile planetary gearbox which requires less space for installation, and draws considerably less current than traditional motor/gearbox configurations. Available in 12 volt and 24 volt models, Compact Motor™ electric winches operate at variable speed in proportion to the pressure applied to the push button, for smooth and quiet operation.
Illuminated "intelligent" push button Compact Motor™ winches are supplied with a push button with integrated LED which illuminates when power to the winch system is on. The push button incorporates a hinged safety cover to prevent inadvertent winch operation and is water resistant rated to IP67.
The push button also acts with the controller to flash status codes that assist with trouble shooting in the event of overload or where other system protection intervention occurs. A cable for connection of the push button is included for convenient installation.
Built-in protection - Integrated overload protection - The controller is pre-set to stop the winch if the maximum pull load is exceeded. Operation can resume within a few seconds when the load returns below the limit.
- Thermal overload protection - The motor is fitted
Specifications
| Brand | ANDERSEN |
|---|---|
| Part Number | RA2040014100 |
| EverTide SKU | 76496 |
| UPC | 9316800471379 |
| Voltage | 12 V |
Specifications are provided by the manufacturer. Confirm fitment for your application before ordering, or contact us and we'll help.
Compare similar products
Complete your setup
ANDERSEN 12 ST FS Self-Tailing Manual Single Speed Winch - Full Stainless
$631.90
ANDERSEN 18 ST FS Self-Tailing Manual Single Speed Winch - Full Stainless
$825.41
ANDERSEN 28 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless Steel
$1165.70
ANDERSEN 40 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless Steel
$1360.14Returns & warranty
Returns are accepted within 30 dayson items that are unused and in their original packaging. Some items may be subject to a manufacturer restocking fee. Special-order items may not be eligible — if you're unsure, ask us before ordering.
ANDERSEN productscarry the manufacturer's standard warranty. For a warranty claim or a return authorization, see our full returns policy or contact us.
Sailing — frequently asked
- How do I size a block for my sailboat?
- Match the block to the line diameter it will carry and to the working and breaking loads of the system (sheet, halyard, control line). Makers publish load ratings and line-size ranges — choose a block whose working load comfortably exceeds the real-world load, without going so large it adds needless weight.
- What is running rigging?
- Running rigging is the moving lines that control the sails — sheets, halyards, and control lines — as opposed to standing rigging (the fixed wire that holds up the mast). Running rigging should be matched to the boat’s blocks, clutches, and winches for smooth, reliable sail handling.
- How do I maintain sailboat winches and hardware?
- Rinse with fresh water after sailing, keep sheaves and bearings clean, and periodically service winches (disassemble, clean, and re-grease per the maker’s instructions). Marine-grade stainless and good maintenance keep hardware working smoothly when loads are high and timing matters.
Customer reviews
No reviews yet — this product.
Fast shipping
Ships from US warehouses — free over $99
The right part
Marine-grade parts matched to your boat
Real support
Questions? We know boats — call or email